Cette page a été traduite avec Google Traduction
Bibliothèque de spécifications d'équipement
Informations de base sur le modèle
-
Fabricant:Ditch Witch
-
Modèle:5700
Voir les fabricants Voir les modèles
Caractéristiques
Information additionnelle
DIMENSIONS
Angle of approach: 25°
Overhang beyond tire: 1.4 in
Height: 92 in
Length - transport: 112 in
Wheelbase: 53 in
Width: 69.5 in
Tread: 51 in
GENERAL
Ditch Witch model 5700 tractor, 4-wheel drive, rigid frame,
rubber tired, conventionally steered (optional rear steering) basic riding unit.
OPERATION
Vehicle speeds @ 2500 rpm with 31 x 15.50-15 tires
Forward, low range: 2.3 mph
Forward, high range: 4.3 mph
Reverse, low range: 2.2 mph
Reverse, high range: 4.0 mph
Vehicle clearance circle (SAE), no backfill blade
With front wheel steer: 30.5 ft
With rear wheel steer: 22.0 ft
Maximum allowable operating weight
2-post ROPS: 9500 lb
4-post ROPS: 9500 lb
Basic unit weight without attahment or backfill blade, with 175 lb operator: 4500 lb
* Operating weight based on H313 attachment with shortest boom, 6 in (150 mm)
wide chain, and 175 lb (79 kg) operator.
BACKFILL BLADE
Blade width: 64 in, 72 in
Blade height: 14 in
Lift height above ground*: 16in
Blade drop below ground*: 8 in
Maximum swing angle (left/right): 28°
Tilt angle (up/down): 11°
* when equipped with 64-in (1.6 m) backfill blade and 31 x 15.50-15 tires
POWER TRAIN
Ground drive transmission: hydrostatic drive infinitely variable from zero to max.,
foot pedal and hand lever operated speed /direction control.
Differentials: Dana model 60 (Carraro 26.14 optional)
Service brake: ground drive speed/direction control brakes machine hydraulically when moved to neutral position.
Parking brake: Spring, foot-operated/hand-set
Attachment drive transmission: hydrostatic, lever-operated speed infinitely variable from
zero to maximum forward with limited stroke reverse.
POWER
Engine: Deutz F4M1011F, oil cooled diesel, direct injection with individual cylinder injection pumps
Cooling medium: engine oil
Number of Cylinders: 4
Displacement 178 cubic inches
Bore: 3.58 in
Stroke: 4.41 in
Max. governed speed as installed (no load): 2500 rpm
Flywheel power @ 2500 rpm (full load): 57 hp
TIRES
Load rating at recommended pressure at 10 mph (16 kph)
29 x 12.5-15, 4-ply bar lug: 2255 lb @ 30 psi
31 x 15.50 - 15, 8-ply bar lug: 3415 lb @ 40 psi
HYDRAULIC SYSTEM
Ground drive pump capacity: 28.4 gpm
Ground drive pump relief pressure: 3625 psi
Attachment drive pump capacity: 28.4 gpm
Trencher chain pump relief pressure: 5000 psi
Plow and saw pump relief pressure: 3750 psi
Auxiliary pump capacity: 11 gpm
Auxiliary pump relief pressure: 2500 psi
FLUID CAPACITIES
Fuel tank: 16 gal
Engine oil (initial fill): 14 qt
Hydraulic reservoir: 9.5 gal
Hydraulic system (initial fill): 52 qt
BATTERY
Group 26/26R/70, cold crank @ 0° F (-18°C), 500 amp - cranking amps @ 32°F (0°C), 700 amp
Angle of approach: 25°
Overhang beyond tire: 1.4 in
Height: 92 in
Length - transport: 112 in
Wheelbase: 53 in
Width: 69.5 in
Tread: 51 in
GENERAL
Ditch Witch model 5700 tractor, 4-wheel drive, rigid frame,
rubber tired, conventionally steered (optional rear steering) basic riding unit.
OPERATION
Vehicle speeds @ 2500 rpm with 31 x 15.50-15 tires
Forward, low range: 2.3 mph
Forward, high range: 4.3 mph
Reverse, low range: 2.2 mph
Reverse, high range: 4.0 mph
Vehicle clearance circle (SAE), no backfill blade
With front wheel steer: 30.5 ft
With rear wheel steer: 22.0 ft
Maximum allowable operating weight
2-post ROPS: 9500 lb
4-post ROPS: 9500 lb
Basic unit weight without attahment or backfill blade, with 175 lb operator: 4500 lb
* Operating weight based on H313 attachment with shortest boom, 6 in (150 mm)
wide chain, and 175 lb (79 kg) operator.
BACKFILL BLADE
Blade width: 64 in, 72 in
Blade height: 14 in
Lift height above ground*: 16in
Blade drop below ground*: 8 in
Maximum swing angle (left/right): 28°
Tilt angle (up/down): 11°
* when equipped with 64-in (1.6 m) backfill blade and 31 x 15.50-15 tires
POWER TRAIN
Ground drive transmission: hydrostatic drive infinitely variable from zero to max.,
foot pedal and hand lever operated speed /direction control.
Differentials: Dana model 60 (Carraro 26.14 optional)
Service brake: ground drive speed/direction control brakes machine hydraulically when moved to neutral position.
Parking brake: Spring, foot-operated/hand-set
Attachment drive transmission: hydrostatic, lever-operated speed infinitely variable from
zero to maximum forward with limited stroke reverse.
POWER
Engine: Deutz F4M1011F, oil cooled diesel, direct injection with individual cylinder injection pumps
Cooling medium: engine oil
Number of Cylinders: 4
Displacement 178 cubic inches
Bore: 3.58 in
Stroke: 4.41 in
Max. governed speed as installed (no load): 2500 rpm
Flywheel power @ 2500 rpm (full load): 57 hp
TIRES
Load rating at recommended pressure at 10 mph (16 kph)
29 x 12.5-15, 4-ply bar lug: 2255 lb @ 30 psi
31 x 15.50 - 15, 8-ply bar lug: 3415 lb @ 40 psi
HYDRAULIC SYSTEM
Ground drive pump capacity: 28.4 gpm
Ground drive pump relief pressure: 3625 psi
Attachment drive pump capacity: 28.4 gpm
Trencher chain pump relief pressure: 5000 psi
Plow and saw pump relief pressure: 3750 psi
Auxiliary pump capacity: 11 gpm
Auxiliary pump relief pressure: 2500 psi
FLUID CAPACITIES
Fuel tank: 16 gal
Engine oil (initial fill): 14 qt
Hydraulic reservoir: 9.5 gal
Hydraulic system (initial fill): 52 qt
BATTERY
Group 26/26R/70, cold crank @ 0° F (-18°C), 500 amp - cranking amps @ 32°F (0°C), 700 amp
Cette information est fournie à des fins d'information seulement. HDD Broker LLC ne peut garantir l'exactitude ou l'exhaustivité de ces informations. Cette information est sujette à changement par le fabricant. Certaines spécifications peuvent varier selon l'année du modèle.