Equipment Specifications Library
Basic Model Information
-
Manufacturer:Universal
-
Model:UNI 25
-
Rig Size:20,001 - 30,000 lbs pullback
View Manufacturers View Models Back to Listing
Additional Info
DIMENSIONS AND WEIGHT
Length: 221.7 inch (563 cm)
Width: 73.3 inch (186 cm)
Height: 97.7 inch (248 cm)
Weight (without drill pipes): 12000 lbs (5443 kg)
ENGINE
Make and Model: Turbo Diesel
Fuel Type: Diesel
Gross Horsepower: 132 hp (98.4 kw)
Rated RPM: 2500 rpm
EPA Certification: Tier IV
OPERATIONAL
Maximum Thrust / Pullback: 25000 lbs (111.2 kN)
Maximum Spindle Torque: 3600 ft-lb / 4000 ft-lb (4881 Nm / 5423 Nm)
Maximum Spindle Rotation Speed: 185 rpm
Maximum Carriage Speed: 330 fpm
Operating Angle: 18°
DRILLING FLUIDS
Make and Model: Kerr KM-3300PT
Maximum Flow: 72.9 gpm (276.3 lpm)
Maximum Pressure: 1000 psi (68.9 bar)
Fuel Type: 30 gal (113.6 lit)
Hydraulic Tank: 35 gal (132.5 lit)
DRILL ROD
2.375” FS1 (Vermeer compatible): 10 ft (3.0 m)
Rod Basket Capacity: 50 rods
STANDARD ON THE MACHINE
-Automatic Rod Loader (Row selection function. Rod shift function)
-Stakedown System (Two points auger stakedown system)
-Breakout System (Active breakout automatic mud pump shut-off valve)
-Strike Alert
-Mud Flow Indicator
-Support Lights
-Automatic Rod Greaser
-Mud Pressure Relief System
-Wired Remote (Maneuver, load, unload, and set up your rig)
-UNI Curve System (Roll-Range Preset)
-Locating Remote Display (Integrated or freestanding)
-Cruise Control System (Thrust/Torque Preset)
OPTIONAL
-Wireless Remote (Control essential functions from a safe distance)
-Panoramic Cab (Climate control system)
-Operator’s Station Canopy
-Air Hammer Ready
-Hot Weather Package (Additional cooling systems. Sun reflective paint)
-Cold Weather Package (Heated rack. Engine pre-heater. Hydraulic oil pre-heater)
Length: 221.7 inch (563 cm)
Width: 73.3 inch (186 cm)
Height: 97.7 inch (248 cm)
Weight (without drill pipes): 12000 lbs (5443 kg)
ENGINE
Make and Model: Turbo Diesel
Fuel Type: Diesel
Gross Horsepower: 132 hp (98.4 kw)
Rated RPM: 2500 rpm
EPA Certification: Tier IV
OPERATIONAL
Maximum Thrust / Pullback: 25000 lbs (111.2 kN)
Maximum Spindle Torque: 3600 ft-lb / 4000 ft-lb (4881 Nm / 5423 Nm)
Maximum Spindle Rotation Speed: 185 rpm
Maximum Carriage Speed: 330 fpm
Operating Angle: 18°
DRILLING FLUIDS
Make and Model: Kerr KM-3300PT
Maximum Flow: 72.9 gpm (276.3 lpm)
Maximum Pressure: 1000 psi (68.9 bar)
Fuel Type: 30 gal (113.6 lit)
Hydraulic Tank: 35 gal (132.5 lit)
DRILL ROD
2.375” FS1 (Vermeer compatible): 10 ft (3.0 m)
Rod Basket Capacity: 50 rods
STANDARD ON THE MACHINE
-Automatic Rod Loader (Row selection function. Rod shift function)
-Stakedown System (Two points auger stakedown system)
-Breakout System (Active breakout automatic mud pump shut-off valve)
-Strike Alert
-Mud Flow Indicator
-Support Lights
-Automatic Rod Greaser
-Mud Pressure Relief System
-Wired Remote (Maneuver, load, unload, and set up your rig)
-UNI Curve System (Roll-Range Preset)
-Locating Remote Display (Integrated or freestanding)
-Cruise Control System (Thrust/Torque Preset)
OPTIONAL
-Wireless Remote (Control essential functions from a safe distance)
-Panoramic Cab (Climate control system)
-Operator’s Station Canopy
-Air Hammer Ready
-Hot Weather Package (Additional cooling systems. Sun reflective paint)
-Cold Weather Package (Heated rack. Engine pre-heater. Hydraulic oil pre-heater)
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.