Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    JT520
  • Rig Size:
    0 - 10,000 lbs Pullback

View Manufacturers View Models Back to Listing

Specifications

Weight 16 lbs 16 lbs
Engine Cooling System Liquid
Thrust 4,500 lbs 20 kN
Hydraulic Tank Capacity 8 gal 30 L
Manufacturer's Gross HP Rating 32.8 hp 24.5 kw
Fuel Tank Capacity 10 gal 38 L
Number of Cylinders 3
Length 117" 2.97 m
Height 66.5" 1.69 m
Min Bore Diameter 2.5" 63.5 mm
Weight 3150 lbs 1430 kg
Max Pressure 500 psi 34.5 bar
Fuel Type Diesel
Entry Angle 11°-16°
Displacement 68.6 cubic inches 1.12 L
Pullback 5,000 lbs 22.2 kN
Min Bend Radius 70' 21.3 m
Pipe Diameter 1.1" 28 mm
Joint Diameter 1.75" 44.5 mm
Max Flow 5 gpm 18.9 L/min
Length 59" 1.5 m
Max Spindle Speed 195 RPM
Rated Engine RPM 3000 rpm
Ground Drive Speed 1.53 mph 2.46 kmh
Max Spindle Torque 500 ft/lbs 678 Nm
Make and Model Kubota D1105-T-E3B
Width 35.5" 902 mm
Emissions Compliance EPA TIER 4I EU STAGE IIIA

Additional Info

UPDATED JANUARY 2016

DIMENSIONS
Overall machine length*: 117 in (2.97 m)
Overall machine width*: 35.5 in (902 mm)
Overall machine height*: 66.5 in (1.69 m)
Drilling unit operating mass*: 3150 lb (1430 kg)
Entry angle: 11° to 16°
Angle approach: 18°
Angle departure: 18°

POWER PIPE
Length of drill pipe (nominal)*: 59" (1.50 m)
Diameter of drill pipe tool joint end: 1.75" (44.5 mm)
Diameter of drill pipe: 1.1" (28 mm)
Minimum bend radius: 70 ft (21.3 m)
Weight of drill pipe (lined): 16 lb (7.25 kg)

OPERATION
Spindle speed*: 195 rpm
Spindle torque*: 500 ft/lb (678 Nm)
Carriage thrust travel speed*: 142 fpm (43.3 m/min)
Carriage pullback travel speed: 142 fpm (43.3 m/min)
Thrust force*: 4500 lb (20 kN)
Pullback force*: 5000 lb (22.2 kN)
Bore diameter: 2.5 in (63.5 mm)
Backream diameter: 4 in (102 mm)
Ground travel speed, maximum*
-Forward: 1.53 mph (2.46 km/h)
-Reverse: 1.53 mph (2.46 km/h)

POWER
Engine: Kubota D1105-T-E3B
Fuel: Diesel
Cooling medium: Liquid
Injection: Indirect
Aspiration: Turbocharged
Cylinders: 3
Displacement: 68.6 in3 (1.12 L)
Bore: 3.07 in (78 mm)
Stroke: 3.09 in (78.5 mm)
Manufacturer's gross power rating **: 33 hp (24.6 kW)
Rated speed: 3000 rpm
Emissions Compliance: EPA Tier 4i (EU Stage IIIA)

DRILLING FLUID SYSTEM (ON-BOARD)*
Max drilling fluid pressure: 500 psi (34.5 bar)
Max drilling fluid flow: 5 gpm (18.9 L/min)

FLUID CAPACITIES
Hydraulic reservoir: 8 gal (30 L)
Fuel Tank: 10 gal (38 L)

BATTERY
SAE reserve capacity rating: 85 min
SAE cold crank @ 0° F (-18° C): 525 A

Specifications are general and subject to change without notice.

View Manufacturers View Models Back to Listing

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x